Cctalk Serial Interface
Jan 13, 2019 - Im looking fordward to integrate a coin acceptor into one of our divices. This specific coin acceptor CF7000 uses the ccTalk protocol I've been. Wurth wow 4153 rus torent.
>: Pescara Converter The Pescara Bill Acceptor Multi-Protocol Converter, product code MAPIRB, is a small, low-cost unit designed for those machine manufacturers and operators who have host systems (games, kiosks, change machines etc.) which currently use a bill acceptor using one interface / communications protocol, but who now wish to use a new bill acceptor that is only available with a different interface. The current version connects note / bill acceptors that use the ID003 or ccTalk serial protocols to games / systems that use the Ardac 2, 'Mars Vend Serial', ccTalk or GPT V2.2 protocols, but many other variants can be easily produced. The host protocols that we have implemented are carefully designed and implemented such that your machine should be unable to detect any differences between your existing bill acceptor and this protocol converter.
Physically, the Pescara Bill Acceptor Converter is an 8cm square package, with 4 data connectors: 2 x RS232 interfaces, a ccTalk interface and a Mars Vend Serial interface. Of these the appropriate two will be used in your particular application. The converter unit is configured at installation by changing a small, rotary switch. The converter board is supplied in a plastic enclosure that can easily be mounted within your machine. We carefully test the host protocols as follows: • For ccTalk, we test the protocol converter against the Money Controls “ccTalk compliance program”. Our converter closely imitates the MCL Lumina, achieving a score of 100% compliance with even the more esoteric commands fully implemented.
• For Ardac 2, we use the MCL “Proclaim” utility to ensure that our converter closely imitates the existing MCL Ardac 2 / WACS acceptor. • For Mars Vend Serial, we exactly meet the timing requirements shown in the MEI technical documentation. • For GPT V2.2 Enhanced Serial, we use a protocol test tool to ensure that our converter exactly imitates the existing GPT Argus D acceptor. A brochure describing the converter is available for download. If you are interested in using this Pescara protocol converter to improve your products, please contact us at, or contact Andy Graham on +44 (0) 161 285 6877 or Fax us on +44 (0) 870 460 3318.
The logic levels for the ccTalk line are 3.5 to 5V for mark state (idle ) and 0 to 1V for space state (active). This allows a low cost interface width 5V microcontrollers. Some dedicated gaming PC based platforms like have one or more built in ccTalk ports. Simple 5V microcontroller interface A normal switching diode can be used but the noise margin could be to low. The resistor can be in 1Kohm to 10Kohm range. If the Tx output is open colector you can connect together TX RX and data line without the diode.